Do-it-yourself oven for working out: drawings, video and description of the manufacturing process
For heating technical rooms such as garages, workshops and utility blocks, a do-it-yourself stove can be made. Drawings, videos and additional information about the creation process will allow you to better understand the basic principles of building such a structure.
The content of the article [Hide]
Positive and negative qualities
Before starting work, it is recommended that you familiarize yourself with the pros and cons of furnaces operating on the presented type of liquid fuel. Having evaluated the positive and negative points, you can decide whether it is worthwhile to engage in self-production of the heating structure.
The configuration of structures can be very diverse
List of main advantages
First of all, it is proposed to consider a list of the main advantages:
The furnace runs on waste oil
Several minor flaws
Do not forget about the disadvantages that such ovens still have. The first is the rapid cooling of the structure. Normal heating is provided only during fuel combustion. However, for utility rooms, this disadvantage is not significant.
The main elements of a heating structure of this type
Another disadvantage is the need for frequent cleaning. chimney and the oil chamber itself. However, in fact, it all depends on the operating time of the structure.In garages and workshops, stoves are not constantly heated.
About the main types of structures
Not all types of ovens can be made at home by hand. Drawings, videos and technical data for certain types of structures will be a useless application due to their complex design. You can independently make only conventional pyrolysis burners, which are assembled on the basis of ready-made containers or using metal sheets.
The dimensions of the structure for heating are quite compact
As for models with a drip feed of liquid fuel, it is hardly worth trying to make them yourself. Such designs are economical in fuel consumption, but are difficult to manufacture. In addition, they are sensitive to the quality of the fuel used.
A more sophisticated model, working on mining
Do-it-yourself stove for working out: drawings, videos and other useful information
Although many specialty stores have a working oven, not all consumers are eager to buy it. Many of them are trying to find a more economical solution, which is to build the structure on their own. It is assembled from inexpensive items.
Massive construction with metal legs
Making a waste oil furnace with your own hands: drawings of structures from a gas cylinder
An unnecessary gas cylinder can be taken as a basis for a future design. Its walls are quite thick, so they will burn out for a very long time. In addition, such a container has a suitable shape. Additional materials will require metal pipes, corners and sheets.
DIY drawings
The interior must be divided into two combustion chambers. One will be at the bottom and the other at the top. On the lower side, legs from metal corners are attached by welding. A partition is attached to the cover of the upper chamber in the same way. It should be located closer to the chimney.
Two circles are cut from the steel sheet. The first one will act as a removable cover for the bottom camera. The second circle will create the bottom of the top compartment. In the blanks, holes are made in the center corresponding to the diameter of the chimney.
48 holes are drilled in the connecting pipe, eight of them are made in a circle, and six in height. Their diameter should be 9 mm. This is necessary for the afterburner, in which the burning vapors will be saturated with oxygen. At the final stage, a chimney is connected to the structure.
Special holes must be made in the pipe
In the finished drawings of the waste oil stove, you can find the specific dimensions of certain parts. If they are not indicated, then you must make measurements yourself.
Creation of a waste oil furnace with a water circuit from metal sheets
Above, we talked about the construction of a finished container in the form of a gas cylinder. However, many want to know how to make a working furnace from ordinary metal sheets directly with a water circuit. The thickness of the steel should be 4 mm for the walls and 6 mm for the lids and bottom.
Stationary steel sheet heating structure
Blanks are cut out from individual sheets according to the drawings. They are cut out with a grinder, after which they are welded together around the perimeter. After manufacturing, seams are checked for tightness without fail. A 6x6 mm hole is made in the cover of the lower compartment for filling fuel.
The sheets used must be of sufficient thickness
Holes are drilled in the connecting pipe, as in the case of a gas cylinder structure. A chimney is attached to the top cover.
Additional drawing for the manufacture of the structure
Basic rules of operation and maintenance
To protect yourself when using a homemade stove, as well as extend the life of the structure, you must adhere to some rules:
It should be about this size
The structure must be cleaned regularly
Summarizing
After studying the materials presented, you can see the process of making a homemade stove in the video. Testing for this design is the main and only type of liquid fuel. With proper assembly, heating structures can serve for a relatively long time. However, much depends on the quality of the materials used in each case.
Video: do-it-yourself oven for working off!
Loading... See also:
Wood-burning fireplaces for home: modern interpretations of classic engineering solutions 
And Ivanushka never dreamed of! How to make the best brick or metal sauna stove with your own hands 
Stove with a water circuit for heating a house: device and selection 
DIY solid fuel boilers for long burning: drawings and assembly process 
A few useful tips on how to choose a warm water baseboard: price, reviews and characteristics 
Do-it-yourself water heating of a private house: piping schemes, rules for choosing equipment
