DIY gate: drawings, photos and videos of different types

Tags:Fencing, With your own hands

A gate is an integral part of any fence or garage. Today they can be made independently, the main thing is to choose the right type of construction. They will help to complete the gate with their own hands: drawings, photos and videos. This information will also help to determine the material from which the construction will be carried out.

Gate in a private courtyard

The content of the article [Hide]

1 Features of swing gates and the subtleties of their implementation
2 Features of the sliding gate device
3 Tips and tricks for DIY work
4 Video: do-it-yourself sliding gates

Features of swing gates and the subtleties of their implementation

Hinged products are a familiar option for all. They are used in summer cottages, in private houses and in the construction of garages. A wicket can also be located next to such options. The design involves the installation of two supporting elements along the edges of the canvas. Today, it is enough to simply make a swing gate with your own hands. Drawings, photos and videos will help you learn all the intricacies of work.

Swing gates

Supporting elements arrangement

At the first stage of construction, it is necessary to install supports. Most often, these are metal pillars of a suitable diameter, which are concreted into the ground. Often fences do with brick posts. In this case, they can also be a support for the product. But do not forget when laying bricks, make metal mortgages to which the hinges will be welded.

Arrangement of pillars

Sash preparation

From which side such hinges will be welded, it depends in which direction they will open. That is why, making a gate with your own hands: drawings, photos and videos must be viewed without fail. To make the sashes, a metal frame is most often used, which sheet material is attached to. If the fence is wooden, then it is more expedient to make the gate from wood. The frame in this case can be made both from metal corners and from a bar.It is important that the flaps are not too heavy, otherwise they will put a lot of stress on the posts and hinges. Over time, this can lead to deformation and the sash will not close well.

Swing gate leaves

Therefore, it is worth studying some information before making a swing gate with your own hands. Drawings of photos and videos will help you get acquainted with all the subtleties of work and prevent all kinds of defects. At the final stage, a locking system must be installed on the sash. The simplest option might be a simple bolt.

Swing model design

Video: swing gates made of corrugated board and metal profile

Features of the sliding gate device

Sliding options are increasingly being used during the construction of fences. They take up relatively little space. In addition, the machine can be located just a few centimeters from the fence and this will not interfere with their opening or closing. The presence of a variety of building materials makes it possible for everyone to make a sliding gate with their own hands. Drawings, photos and videos will allow you to more thoroughly study all the features of the work.

Sliding option

The main types of sliding gates:

console;
suspended;
retractable.

Suspended variety

The suspended version is not very popular. This is due to the fact that a rail is installed in the upper part along which the canvas moves. This rail is a kind of limiter, so not every vehicle will be able to enter the yard.

Installing the product

Rollback products

For the operation of sliding options, the rail is installed along the wall and directly in the opening itself. It is impractical to use such a system in the northern regions. Since with a large amount of snow, the operation of the flaps will be difficult, and it will be necessary to constantly clean the snow-covered areas.

Sliding options scheme

Console type advantages

The console type is by far the most popular. They can be used in both the southern and northern regions. The movement of the canvas takes place above the ground, so there is no need to constantly clear the path. In addition, the advantages include the fact that there are no limiters at the top. This makes it possible to drive into the courtyard even for cars with high heights.

Console type

To install this type, you need only one support pillar, which will bear the entire load from the canvas. Therefore, it is important to make it as high quality and reliable as possible. The cantilever beam itself on the gate can be located below, above or in the middle of the canvas.

Helpful information!A beam located in the middle is considered the best option, since it generally strengthens the entire structure.

Recoil model

Everyone to cope with the implementation of sliding gates with their own hands. Drawings, photos and videos allow you to study the principle of a sliding system. It is important to take into account all the recommendations when doing the work.

Electric actuator and accessories kit

Features of the execution of sliding gates

Sliding options allow you to significantly save space in the yard. But at the same time it is necessary to control the space along fence... For the normal functioning of the system, it is first necessary to clear the place of debris and any vegetation.

Sliding structure device

Installation of support elements

The beginning of work is the device of the main support pillar, on which the main load will be provided. Optionally, you can execute do it yourself sliding gates: drawings, diagrams and videos will help you comply with the technology. To work, you need to prepare the following tools:

welding machine and a grinder;
drill and self-tapping screws;
suitably sized rails and rollers.

Rails and rollers

For the execution of the sash itself, it is best to use galvanized material.He is able to serve for a long time, while retaining its original appearance. Polymer coated profiled sheet is very often used.

Helpful information! The use of a profiled sheet is considered the most successful solution, since it is treated with special agents that prevent the occurrence of corrosion.

Products of this type can be equipped with an automatic or manual drive.

Sliding type drawing

At the beginning of the work, it is worth preparing the drawings according to which the work will be performed. Drawings and diagrams also allow you to calculate the exact amount of material required. The height of the gate must correspond fence... In this case, the width of the opening can be very different. Retractable products put pressure not only on the rails, but also on the pole, so special attention should be paid to its design. Its lower part must be submerged in the soil and well concreted.

Support for sliding products

The device of the rails for the movement of the canvas

The sliding gate will walk on a rail that is located on the ground. To do this, you need to choose a U-shaped metal profile. Its length should be equal to two lengths of the canvas. For the stock, you need to make another 30 centimeters. It is important that the rail is installed on a concrete base. Only in this way can you get the most reliable design that will last a long time. After all the rail systems are installed and fixed to the support post, the electric drive can be installed.

Device rails

Assembling the canvas and installing it

The door leaf is made from a metal frame, to which a professional sheet will be attached later. Rollers are attached to the lower part of the metal frame. The door leaf is installed last. Do-it-yourself sliding gates: drawings, photos and videos give complete information about the design and the process of performing the work.

Gate leaf

Tips and tricks for DIY work

Every person can make a gate of any design. It is important to follow the recommendations of specialists and first study some information.

Choose only high quality materials for work. This will allow you to operate the structure for a long period and do not need to carry out repair work.
It is important to pay attention to all drawings and diagrams. Only strict adherence to the scheme will allow you to do all the work correctly the first time. Compliance with the dimensions and parameters makes it possible to make a functional structure that will work without problems.
The installation of an electric type actuator must be carried out with full understanding. If there is no work experience in this area, you should entrust all the implementation to specialists. They will do everything efficiently and quickly. Products will open and close without difficulty.
If the use of a roller system is envisaged, special attention should be paid to its choice. It is best purchased from specialized stores. In this case, such a system will work flawlessly for a long time.

Options for a country house

Today, you can supplement the fence with a do-it-yourself gate. Various materials can be used for manufacturing. The most commonly used wood and metal. Before proceeding with the implementation, it is worth considering which type of construction is best to use. Starting the execution of the gate with your own hands: drawings, diagrams and photos will help you solve even complex problems. Swing gates are a classic version with execution that everyone can handle. For their device, you need a lot of space so that they open freely. You can save space on your personal plot with the help of sliding or sliding gates.