11 simple master classes on how to make flowers from foamiran with your own hands

Foamiran is an unusual and pleasant to the touch material. Faux suede is used to make interior decorations, luxurious bouquets, postcards, and create unique hairpins and headbands. Today, the editors of homemaster.techinfus.com/en/ magazine have prepared 11 step-by-step instructions for their readers on how to make flowers from foamiran with their own hands. We will offer you templates and useful recommendations from the masters, as well as talk about how to properly care for finished products.

Incredible, exquisite and lively foamiran jewelry attracts at first sight

Ranunculus from Thomas: exquisite and simple

Ranunculus is a very gentle creature with lush buds and a variety of colors. This flower can now often be found in the most luxurious bouquets. The ranunculus is 7 to 10 centimeters in diameter and looks a bit like a peony or rose. A full-grown ranunculus may look like a poppy.

Ranunculus made of plastic suede

How to make a plastic rubber ranunculus:

Illustration	Action Description
	To give texture to the petals, the Foma leaf must be ironed through crepe paper. So it will become a little thinner and get a characteristic relief.
	You can stretch the petals on bottles or a small light bulb.
	Circle the petal patterns. It is better to do this with a white pencil, so traces will not remain on the material. Do not use sharp objects for outline, they can tear the sheet.
	Before cutting out the petal, shape it on the raised object, stretching it slightly in the desired direction.
	After stretching, cut out the petal so that the pattern mark line is not visible.
	After making petals of different sizes, make a few of the smallest blanks, tinted them with a sponge and pastel.
	Make the core of the flower from a bead or foil ball. Wrap the workpiece with foamiran and stretch the material so that there are no folds.
	Fix the wrapping around the center of the flower with hot glue.
	Cut off the head with scissors at the base.
	Attach the base to the stem wire and glue it in with second-hand glue.
	Wrap the stamens around the head and glue them with hot glue.
	Fasten the tinted petals together so that you get a small circle with a diameter of the center of the flower. When gluing, make sure that the petals are about halfway over each other.
	After creating the ranunculus core, glue the petals sequentially from smallest to largest in a circle.
	The gluing technology is simple - each petal should be approximately half the size of the previous one.
	In this way, glue 4-6 layers of petals. The more petals, the larger the flower will turn out.
	Cut the sepals out of the green Thomas and pull them slightly to shape.
	Stick 5 sepals on the base of the flower, they can be slightly tinted with powder.
	Slide a floral tube over the wire and fix it with second-hand glue.

How to make a rose from foamiran

Rose is the queen of flowers, it is a recognized standard of beauty and sophistication. The delicate rose petals are protected by sharp thorns.

Delicate and at the same time dangerous - this beauty does not leave anyone indifferent

This flower has many varieties with different colors, uniform or on the tips of the petals. The most popular foamian craft workshops are associated with rosebuds.

Patterns and patterns for roses from foamiran

You can make a template yourself by simply disassembling a living flower into petals. Please note: you will not find two identical shapes. Choose thin cardboard or heavy paper for the template. Just circle the petals spread out on the cardboard and cut them along the contour. You can use ready-made templates and patterns. Just print them on a printer.

In handicraft stores, you can find one-piece templates that can be cut directly on the Thomas sheet.

How to make a large rose from foamiran

Illustration	Action Description
	Cut out three sizes of petals and sepals from the template.
	Protonate the blanks: petals around the edge, sepals over the entire surface.
	Heat the petals on a warm iron to shape them.
	The petals are shaped by twisting and stretching the material.
	Make a stem of wire and wrap it with green duct tape.
	Make a drop-shaped core out of foil, fix it to the stem with hot glue.
	Stick the petals of the bud on the core so that they completely hide the foil. Leave the ends of the pieces free gradually to simulate blooming.
	Warm up the sepal blank on the iron and shape it.
	In the center of the sepal make a hole for the stem, thread the stem.
	Glue the sepal with a glue gun so that it fits snugly against the bud.
	To create a full rose, continue glueing the petals, gradually increasing their size.
	The more layers of petals, the larger the rose will turn out.
	The final touch to a full rose is the sepal.

You can make a decoration from such a rose - a brooch or a hairpin.

Similar colors can be used to decorate a beautiful composition on the table, curtain hooks

Small roses from foamiran - video master class

Small roses are the basis for decorating small hairpins, brooches and even rings. It's easy to make them. You can even use a special pre-shaped hole punch. How to do it quickly and easily - in the video:

Related article:

Lily making workshop

Lily is the princess of the flower world. Its large bright inflorescences are a recognized symbol of purity and innocence.

Christians called this flower the symbol of the Mother of God and believe that it originated from the tears of the progenitor of humanity Eve

Step-by-step making of an artificial lily in a master class:

Illustration	Action Description
	For a lily, you will need to stock up on ready-made stamens and a pestle.
	The base of the flower is held together with adhesive tape. The pistil is in the center, the stamens are around it.
	After fastening the parts, unfold them as shown in the photo.
	For the texture of the petals, special molds are required - they can be found in handicraft stores.
	Put the mold on the fom and heat it on the iron, then press the parts tightly until they cool.
	Cut the veined petals along the contour with scissors.
	Each petal needs a rigid frame to bend in the right direction. For the frame, a thin wire wrapped in material to match the petal is used.
	Gif 2 The wire is carefully glued in the center of each petal.
	SKR 8 The workpiece must be slightly bent, as shown in the photo.
	SKR 9 Using a lighter, warm up and slightly stretch the edges of the workpiece.
	SKR 10 Lightly tint the base of the petals with pastel.
	SKR 11 Make lily leaves in a manner similar to petals. Use appropriate molds.
	SKR 12 Gather the petals and leaves with a strip of green duct tape.

Foamiran hydrangea - video instructions for making

Lilac or hydrangea - these inflorescences of small flowers are gorgeous look in bouquets... The work on their manufacture is long and painstaking.

It will take a lot of small parts 1-1.5 cm in size, which are collected in a general composition

For making small flowers, it is better to stock up on a curly hole punch, it will greatly simplify the task. The process of creating a hydrangea flower in this detailed video:

DIY growth flowers from foamiran

Huge flowers from foamiran are an interior decoration for a home or a trading floor. Such an unusual decor will immediately attract the attention of guests. To create such a flower, you need to use the same patterns, only increased in size. For cutting, it is better to take roll foamiran, it will not limit you in the dimensions of the blanks.

To glue the parts, you will need the same glue gun.

The petals are shaped with a hot hair dryer

Using this technique, you can create an unusual interior. studio apartments, a fashion store, children's room or living room.

Related article:

Simple magic of wildflowers

Wildflowers, for all their simplicity, can become part of a very refined composition, fresh and delicate. They look good if you pick up many flowers of different colors and shapes.

In a field bouquet, chamomiles, poppies and cornflowers, yellow buttercups look gorgeous

How to make some of your favorite colors - see our instructions.

How to make a chamomile flower - instructions for beginners

Chamomile is just a seemingly simple flower. It is not so easy to make it out of Thomas - it will take patience and many miniature details.

Illustration	Action Description
	Using the miniature template, draw and cut out 30 small petals from white foamiran.
	Make a fringe out of a strip of yellow fom. Carefully cut the material with scissors with a minimum distance.
	Emboss the chamomile petals with tweezers. Just preheat the workpieces and slide the tweezers over the hot material.
	Bend the stem wire at the tip so that you get a hook. Insert the tip of the fringe into it.
	Rotate the stem while gluing the fringe to create the center of the flower.
	Heat the finished core over a candle. The vom will become thinner and the core will look very natural.
	Glue the first row of petals with a hot gun.
	Attach the second row so that the lower petals fit between the upper ones.
	Cover the back of the flower with a curly detail. Then you can attach a hairpin or brooch pin to it.

Foamiran poppy flower: pattern and video instruction

Another favorite wildflower is the bright poppy. He looks great in a company with daisies, and by himself in hairpins and brooches.

Poppy flower pattern

The peculiarity of this flower is its middle. How to make it correctly from plastic suede is described in the video instructions:

Aerobatics: peony flower

Delicate and luxurious peony is a complex construction of many petals of different shapes and sizes. In the center there are sharp parts with an uneven edge, at the edges there are rounded blanks.

This design will take more than one hour, but the result will certainly please you

We suggest that you familiarize yourself with the detailed step-by-step instructions from the experienced craftswoman Nadezhda Konovalova:

Spring freshness of a tulip: very simple

Use silk foamiran to make tulips - it works best for these delicate flowers.

Illustration	Action Description
	Green shape for leaves and pink or red, orange, yellow for petals.
	Tint the base of the petal with oil pastels.
	Give the petals a rounded shape and relief.
	On the tinted leaves, draw a longitudinal relief using tweezers.
	Wrap foamiran over the wire to create a stem.
	Secure the stamens as shown in the photo.
	Form the flower head from the Thomas strip to fix the petals.
	With a sticky green tape, wrap the blank and the stem of the flower.
	Glue the petals with seconds glue.
	Tie the tulip petals together.
	Glue the leaves to the stem and the flower is ready.

How to make an orchid flower from foamiran using patterns and templates

Orchid is a capricious flower, and not every housewife manages to achieve its regular flowering.

Thomas orchid looks very natural

Well, no problem - you can deceive nature and admire hand-made orchids. How to do this is shown in the video instructions:

We do not throw anything away: leftovers into business

If you have scraps of foamiran, do not rush to part with them. In our workshops, you saw flowers with petals of different sizes, including very small ones. Even berries can be made from tiny scraps - for this you need to wrap the beads with a shape. Miniature buds will also decorate your compositions. See how this might look gorgeous:

How to care for foamiran jewelry

Foamiran is not afraid of water, so if necessary, such flowers can be washed with warm water and soap and blotted with a cloth. But remember: you cannot use abrasive powders, they will hopelessly ruin the product. Do not expose finished jewelry to heat, try to avoid sharp objects that can tear the material. Keep the phom away from acetone, alcohol, and nail polish remover.

That's all the simple requirements for caring for foamiran flowers.

Unleash your imagination in working with this delicate and pliable material!

If you have experience in making such jewelry - share it in the comments!

RATE THIS ARTICLE

Loading...

 

See also:

Weaving from newspaper tubes: new ideas with step-by-step instructions and photos Affordable foot comfort and coziness in the room: we make an excellent do-it-yourself rug from old things Art that is available to everyone - decorating the Christmas tree and not only with the help of Christmas balls with your own hands 🐖 And let's lure luck into the house in 2019? The do-it-yourself symbol of the new year (pig) will help us with this. 🎄 How to make a cool Christmas tree out of threads and glue 🎄 We give bright emotions along with an unforgettable handmade New Year's bouquet