Electric hob: device, characteristics, how to choose

In most cases, our kitchens have gas stoves. Many people treat electric hobs with prejudice as a kind of forced replacement, which will take a long time to get used to. The reasons for this attitude lie in a banal ignorance of performance and functionality. In this article we will show you what a modern electric hob is, how to choose one. Let's talk about the main parameters, varieties and functions.

Modern electric hobs

The basic structure of electric hobs and their types

Gasification of residential buildings is not so widespread in the far abroad. Therefore, home appliance manufacturers have paid close attention to the development of comfortable, functional electric hobs. Compared to gas, they have a number of undeniable advantages:

The electric hob can be the hottest accessory in your kitchen

Classic

This electric hob is a high-tech device. Its body is made of steel, glass ceramics or other material. It is 4-7 cm thick and lightweight.Depending on the model, from 2 to 7 burners of different power and diameter can be located on the surface.

The main components of an electric hob:

1. Glass ceramic hob body.
2. Control Panel.
3. Control signal wiring.
4. Terminal block for connecting the power supply.
5. Thermostat connection terminal, through which power is supplied to the heating coil.
6. Thermostat.
7. Heating coil.
8. Control panel indicators that provide feedback and control over the efficiency of the burners.
9. Protective element with a seal that separates the control panel from the high temperature zone.

Electric hob construction

Related article:

Grill, deep fryer, teppan yaki, double boiler, extractor hood

Fierce competition among home appliance manufacturers has led to the emergence of various hybrid electric hob devices. Recently, there has been a tendency to switch to modular electric kitchens, when each hob or other device of the hob is a separate module. This technology is quite convenient, as it allows for individual packaging with the necessary kitchen equipment.

Built-in electric cooker, model Miele CombiSet KM411

Grill

There are two modifications:

This grill is also convenient because the grill can be removed for cleaning.

It should be noted that the first option, in the form of electric hobs, does not make sense to acquire, since there are special metal panels for cooking. They allow you to turn any hob into grill.

A dedicated cooking surface and its use on an electric hob:

Deep fryer

It is found only in a modular design without a rigid connection to the hob. It is one of the built-in elements. Main selection criteria:

Built-in deep fryer, model Smeg PGF30F

Teppan yaki

This is a smooth metal surface with frying edges, in fact, analogous to a grill. It is widely used for cooking in Eastern culture.

Built-in teppan yaki panel

The main criteria for choosing an accessory are:

Double boiler

This device is ideal for adherents of dietary and healthy eating. The steamer has a large useful volume and power. You can cook on two levels. When choosing, special attention should be paid to the presence of a security system. The device should turn off when overheating or when the water has completely evaporated. The control system has a built-in timer and a wide range temperature control system.

Modular electric hob with integrated steamer, model Gaggenau VK 230

Hood

The electric hob can be supplied complete with hood... Moreover, it can be both built-in and domed. A built-in cooker hood is usually installed in the work surface of a worktop. In this case, it is necessary to take into account a significant increase in the technological gap up to 25-30 cm under the surface of the table top.

Built-in hood

Choosing an electric hob

When choosing an electric hob, pay particular attention to the type of heating elements. This affects not only the speed of cooking and energy savings, but also the ease of use. The second most important criterion is the material of manufacture of the surface itself. As a rule, ego is judged by practicality: the degree of dirtiness, ease of cleaning, the ability to use abrasive cleaners, the need for special care, and the like. The final selection condition is the different functionality and control features. Let's analyze the listed parameters and some other characteristics in more detail.

Cover material

The front side of the electric hob is made of stainless steel, glass ceramic or heat-resistant enamel. It is impossible to say unequivocally which material is the best. They differ significantly in their performance characteristics. Each of them requires special care.

Glass ceramics

It is the most expensive, but nevertheless, very popular material for hobs. It has an attractive appearance and is quite practical to use. Due to its density and smoothness, any dirt is removed with one movement of the hand. The material has a fairly low thermal inertness, so it cools quickly.

Elite electric glass ceramic hob

However, glass ceramics has a significant drawback - fragility. Despite the assurances of the manufacturers about the high strength and shock resistance of the material, glass ceramics can crack from a point impact. Cracking can cause sudden changes in temperature, such as spilling cold water on a hot surface. When cleaning, limited use of abrasive detergents is allowed.

Enamel

The enamel coating is considered traditional and the most practical for the kitchen. Such material has high hygienic properties, is practical, aesthetically pleasing and affordable. There are two ways to apply enamel:

Enamel-coated hob

Stainless steel

The material is notable for its affordable cost and high resistance to temperature effects and mechanical damage. However, polished stainless steel is a very impractical material. Any dirt, up to fingerprints, becomes immediately visible on it. It is recommended to use a matt or pigmented finish, which is less visible for dirt.

Chrome plated stainless steel

Hotplates

Their choice directly depends on the material of the hob. For enamel and stainless steel, cast iron burners are typical. Glass ceramic panels can be equipped with several types of heating elements.

Cast iron

Here, heating coils are used as a heat source. The control is carried out by mechanical valves, and in some cases it is completely absent. It takes 10-15 minutes to reach the maximum heating mode. They have high thermal inertia.

Cast iron burners

Cast iron burners are the cheapest and most reliable. They rarely break, and repairing them will not be expensive. These heating elements are virtually insensitive to power line voltage surges.

Halogen

Heating is carried out as a result of the interaction of a halogen lamp and a thermal coil. The set temperature regime is reached within a few seconds. Cooling also occurs quickly.During operation, it is necessary to periodically change the halogen lamp, which is a consumable. The main disadvantages can be considered a rather large energy consumption - from 2 kW / h, as well as strong heating of the surface near the burners.

Halogen burners

Rapid

A nichrome spiral is used here as a heating element. Exit to the set temperature regime is carried out in 10-15 seconds.

Rapid burners

Hi-lights

In this case, high-resistance alloy tapes serve as a heating element. The heating rate of such a burner does not exceed 5-7 seconds, energy consumption is in the range of 1.5-2 kW / h.

Hi-lights cooking zones

Induction

This is the most economical type of burner. The food is heated not by the hob, but directly by the cookware itself. The disadvantage of this type is the impossibility of using aluminum glass or ceramic kitchen utensils. Cooking utensils should be on such a stove, should have the most even surface and be made of ferromagnetic alloys: steel or cast iron.

Number of burners, shape and size of the hob

These parameters are closely related and it makes no sense to consider them separately. Depending on the number of burners, the electric hob has the following dimensions:

Picture	Model	Size (width), cm	Number of burners
	Siemens ET375 GC 11 E	30	1,2
	Zanussi ZGG 35214 XA
	Simfer H 4030	45,52	3
	Foster 7052142
	Gorenje EC 630 RW	60	4
	Siemens ET 801 SC	61-80	5-7
	Asko HI1194G	80-95	5-7
	Franke FHMT 806 3FLEXI INT	80-95	5-7

Manufacturers today produce electric hobs in a wide variety of shapes. Moreover, the choice of form is dictated not only by design tricks, but also by expediency. The result is a rather unusual, but very comfortable, ergonomic equipment.

Unusual design of electric hobs

Additional functional features

Modern hobs have a lot of additional options that greatly facilitate the cooking process, including:

Control system

Most budget-class electric hobs are equipped with a mechanical control system with stepwise switching of the heating intensity. More expensive models are controlled using a touch panel, which displays various information about the current state of the equipment, including temperature and cooking time.

Related article:

Leading manufacturers

At the moment, almost all household equipment is manufactured in China. However, well-known brands are much more attentive to the quality of their products. In addition, there are many Chinese manufacturers producing fairly high quality products.

Brand name	Product advantages
VENTOLUX	A diverse range of models, aesthetic appearance, practicality and ease of maintenance, safety.
PERFELLI	High quality materials and workmanship, well-thought-out ergonomics of hobs, increased area of ​​burners.
KAISER	High efficiency of heating elements, energy efficiency and energy saving, safety and control system, a wide range of standard sizes.
Electrolux	Simplicity of control and high accuracy of maintaining the set modes, a wide range of models with many modifications, safety of use, the presence of an automatic shutdown system.
Gorenje	Affordable cost, wide model range, well-thought-out ergonomic design, intuitive operation.
Beko	Aesthetic appearance, resistance of the surface material to external influences, the use of several safety systems, overvoltage and short circuit protection.
Bosch	High quality products, reliability and durability, the use of technological innovations, a wide range of models.
PYRAMIDA	Material quality control, various modes of operation, extensive model range.
Candy	Elegant appearance and design ergonomics, ease of use, high reliability and safety of operation.

Popular models in 2018

Below are the reviews on hobs that are the top sellers in 2018 according to the ratings of the leading online stores.

Finally

Electric hobs are vastly superior to conventional gas stoves in terms of functionality and design. However, their widespread distribution is hampered not only by their high cost, but also by systematic power outages.

Video: how to choose a hob

RATE THIS ARTICLE

Loading...

 

See also:

What is the best electric built-in oven: consumer reviews Connecting the washing machine to the water supply and sewerage system: basic methods Ideal replacement for gas and electric stoves: induction hob, pros and cons, and tips for choosing Convection in the oven: what is it and what is it for A modern touch to your kitchen: the built-in gas 4-burner hob Pros and cons: we study and choose a built-in gas oven for the kitchen