How to glue paper-based vinyl wallpaper: work steps and expert advice
Wallpapering is an important part of any renovation. This process is laborious and complex. Many people wonder: how to glue vinyl wallpaper on a paper backing. In this case, it is important to choose high-quality glue, since when using a low-quality composition, everything will need to be finished again. Features of gluing depend on the selected material. Vinyl panels are popular, which are characterized by reliability, wear resistance and UV resistance. Before purchasing the material, it is worth knowing the features of working with this material.
Finishing with vinyl-based canvases provides an opportunity to apply unusual design techniques in the interior
The content of the article [Hide]
- 1 Properties of vinyl wallpaper
- 2 The nuances of vinyl canvases: positive and negative points
- 3 Varieties of vinyl-based wallpaper
- 4 How to glue vinyl wallpaper on a paper basis: features of the choice of glue
- 5 How to remove old canvases from the walls?
- 6 The need to level surfaces
- 7 How to glue wallpaper correctly: video and stages of work
- 8 How long does paper backed vinyl wallpaper dry?
- 9 Video: glue wallpaper according to all the rules
Properties of vinyl wallpaper
Deciding how to glue vinyl wallpapers on a paper basis, it is worth knowing that such canvases are a layer of PVC, which is distributed on a non-woven or paper base.
Due to its resistance to moisture, a similar material is used in the kitchen area.
The most important advantage of this material is its long service life and resistance to moisture. In this case, you should not glue the canvases near heat sources. The material can be applied to a wide variety of surfaces. Since the panel is characterized by high density, it can mask various cracks or irregularities.
The nuances of vinyl canvases: positive and negative points
Allows you to see how to properly glue paper wallpaper - video. Such canvases can have a non-woven or paper base. All wallpaper models have certain advantages.
Non-woven fabrics can be combined with other options
Non-woven fabrics have the following advantages:
- such a material does not need to be further processed, while it is enough to apply an adhesive solution to the walls;
- increased resistance to wear;
- allow you to hide cracks and irregularities.
The disadvantages include non-plasticity and some transparency.
Canvases on a paper basis are characterized by the following advantages:
- material density;
- the paper stretches well.
The disadvantages include the rapid absorption of liquid, instability to mechanical damage and the need to press the paper against the wall surface for a long time.
Varieties of vinyl-based wallpaper
There are several options for vinyl materials. They can be distinguished according to their structural characteristics, as well as according to the methods of cladding.
It is worth noting the following types of canvases:
- The lightest type of such coating is silk-screen printing. The surface layer contains polyvinyl chloride, on which various textures are distributed;
This option is suitable for expensive and presentable interiors
- a more complex option is considered to be compact vinyl, which has a top layer that imitates a variety of materials: plaster, wood, stone, brick or fabric;
Such a coating has an unusual texture.
- The thickest material is considered heavy vinyl. It has a relief surface. Due to the dense composition, excellent strength is created, as well as the ability to remove all surface imperfections;
Such canvases should not be used for ceiling coverings.
- chemical embossing fabrics are characterized by a shiny base, from which dirt can be removed perfectly.
Unusual ornaments allows you to create this option
Related article:
How to glue vinyl wallpaper on a paper basis: features of the choice of glue
The successful fixing of the coating depends on the correct decision, how and with what solution to glue vinyl wallpaper on a paper basis. Poor glue will provoke the appearance of folds, bubbles and peeling of the cloths from the surface.
Pasting such material can be done alone
The property of gluing this material is that it is heavy, so the glue mass sets quickly and firmly. A good solution allows you to fix the sheet quickly, but at the same time you can have time to place the strips along the joints and align them.
Different types of glue are used for different types of wallpaper.
How to remove old canvases from the walls?
Remove the old one before applying a new coating. This will require spatulas of different sizes, a hammer drill and a suitable stripping fluid.
Water or a solution with some kind of detergent is applied to old canvases. Then the wet coatings are left for a few minutes. Then the wallpaper should be removed with a spatula. You can also use sandpaper.
The process of removing old coatings is laborious.
The need to level surfaces
Experts know what to answer the question: how to properly glue paper-based vinyl wallpaper. The secret is in perfectly aligned walls. The alignment method depends on the features of the vertical deflection.
Plasterboard alignment
For a very curved surface, you can apply drywall... It not only evens out the surface of the walls, but also improves the thermal insulation properties of the room.
If the deviation is less than 6 mm, then the material is fixed with a special solution, and if it is more, then a special frame is created. Fastening is done with self-tapping screws. Then the surface is putty and pasted over.
Before gluing the wallpaper, it is imperative to putty all the joints and caps of the screws
Leveling with plaster
If irregularities are visible even with the naked eye, then it is worth using plaster. You can use different types of plaster. In this case, cement, lime and gypsum compositions are used. Before starting work, you need to clean the surface from dust and dirt.
Plastering allows you to eliminate significant defects
How to make smooth walls with putty?
The putty solution is applied in two stages. A paint net is placed between the layers. This will protect against microcracks. The topcoat can be spread in several steps. Then the surface can be sanded with sandpaper.
Some types of putty have a fairly dense structure
How to glue wallpaper correctly: video and stages of work
Walls can be pasted with different wallpapers. The best options are shown in the photo. The design is selected taking into account the general interior style.
Sticking consists of the following steps:
- walls are being prepared;
Preparatory work may require professional skills
- a primer is applied, with the help of which flaws are closed up and miniature irregularities are hidden;
The primer is considered the key to a quality finish.
- glue is diluted in the container. You should get a solution without lumps and clots;
The adhesive mixture must not contain lumps
- using a level, a line is drawn for gluing the first sheet;
It is recommended to start gluing wallpaper from the window
- the electricity must be turned off in the room, and all switches and sockets must be removed from the walls;
- each roll is cut into strips;
- an adhesive composition is applied to the workpiece, while dry places should not be left;
Adhesive on the wall surface and on the wallpaper sheet can be applied simultaneously
- mortar is also applied to the wall surface;
- sheets are glued end-to-end, without an allowance;
Neat butt-gluing preserves the beauty of patterns or texture
- excess glue is removed with foam rubber or a soft cloth;
Excess glue must be removed immediately
- the edges are trimmed with a clerical knife.
Related article:
Secrets of the correct gluing of the ceiling
The ceiling surface must be glued before pasting the walls. In this case, it is worth choosing lighter materials.When processing the ceiling, it is worth taking out all the items furniture and carpets. If items cannot be taken out, cover them with plastic wrap.
For high-quality pasting of the ceiling, you will need an assistant
How to glue the material in the corners?
The corners require special care. When the distance to the corner zone is less than the canvas, the sheet is cut off with an overlap. This part will slide to the perpendicular wall surface. Then the second layer is overlapped. The sheets are passed by a special roller.
Recommendations for pasting outside and inside corners
How long does paper backed vinyl wallpaper dry?
The drying time of the canvases depends on the dryness of the work surface and temperature values. If the humidity is exceeded, and the temperature is slightly reduced, then the finish will dry for a long time.
The walls will dry quickly in a room with high-quality ventilation, but without drafts
Also, the drying time depends on the type of glue, the amount of solution used and the microclimate in a particular room.
Vinyl material allows you to create a special atmosphere in any interior
Non-woven surfaces can dry within a day, and paper surfaces in a shorter time period.
Vinyl coverings will perfectly fit into any interior
With the help of vinyl wallpaper, you can create a stylish and original interior. When choosing a texture and pattern, it is worth using original design solutions and various combinations.
Video: glue wallpaper according to all the rules
Loading... See also:
Finishing putty for wallpaper - we do it right! 
DIY textured plaster from ordinary putty 
Finishing putty for painting with your own hands 
How to calculate the area of a room: professional advice and basic rules 
Before and after: how to plaster walls with your own hands for a beginner, video and step-by-step guide 
A practical choice for renovation - painting the walls in the apartment: design, photo examples and types of paint
