Several effective ways to clean a washing machine with citric acid and other means

Tags:Bathroom and toilet

Not a single housewife can do without a "helper" in washing at home, and what expensive model they have not purchased, it can suddenly break. One of the main reasons for improper operation is the accumulation of dirt inside. To increase the lifespan of the technique, we will analyze how to clean washing machine citric acid and other available means.

How to clean a washing machine with citric acid

Due to this amount of scale, the heating element breaks

The content of the article [Hide]

1 Reasons for the appearance of dirt
2 How to clean a washing machine with citric acid
- 2.1 How to descale your washing machine in other ways
3 How to clean the washing machine from the smell
4 How to clean the filter and drum in a washing machine
- 4.1 Video: how to clean the filter of a washing machine
5 Few recommendations

Reasons for the appearance of dirt

There are several reasons for the accumulation of dirt, first of all it is water from the water supply system, which comes with impurities of all kinds of chemical elements. They accumulate, harden, and lead to the failure of heating elements, drum or other parts.

Mold formation under the rubber band

The second reason is the work of technology, using heat. The hotter the water, the more limescale deposits appear with each use. You can avoid such a destructive process by installing a special polyphosphate filter that softens the water and protect the heating element.

If you have not thought about the dangers of scale, here are some undesirable consequences of its appearance:

You will pay more for electricity, since by covering the heating element, scale will prevent the water from heating, which means that the machine will consume more forces. If you notice an increase in the duration of the wash behind your technique, this is the first sign of unwanted formations inside.
Due to the constant load, the heating element breaks down. If you do not replace it in time, the software module of the equipment will break down, which means you will have to buy a new unit or spend money on serious repairs.
The appearance of mold and mildew is also the result of scale operation. You will determine this by the unpleasant aroma from your "assistant".

Clean drum

It is better to clean the washing machine elements on time, rather than buying new parts, spending money on calling a specialist.

How to clean a washing machine with citric acid

The unusual properties of citric acid have been known for a long time.For example, summer residents clean her hands in order to eliminate the consequences of working with the land, housewives use it to remove scale from the iron, so the “assistant” in washing is subject to her action.

Add acid

Let's figure out how to clean a washing machine with citric acid. Buy in advance 100 gm of acid, which is not difficult to acquire.

Mini cleaning instructions:

Choose a mode with no laundry and set it from 60 to 90 degrees.
Pour acid into the powder container.
Launch the technique.

With such a simple method, you will remove scale and remove unpleasant odors inside the equipment.

Launching an empty washing machine

Note! You cannot use this method more than once a year.

If you want to eliminate bad odor, add acid to the drum itself. There is no need to think about warning users that this method is harmful to equipment, since purchased cleaning products contain much more aggressive components in the composition. Therefore, once every 365 days, you can cleanse, prolonging the life of the "helper".

Related article:

Which brand is the best washing machine? Getting started with the choice, you need to decide which model of technology is better and better. It is with this question that we will try to understand in detail in this review.

How to descale your washing machine in other ways

If citric acid is not at hand, there is no time to run and buy, and the machine washes longer. There is an alternative - this is the use of vinegar.Consider how to clean washing machine vinegar. Prepare 1 cup vinegar 9% (white).

Where to pour the vinegar?

Mini instruction:

Turn on the machine and set any mode to 60 degrees with an auxiliary rinse.
Pour vinegar into a container under the powder.
Launch the technique.

Note! After cleaning, you need to open the drain valve and wash it, because scale will break off in the process.

This option is effective, although it is preferable to use citric acid, it affects the elements of the washing machine less.

How to clean the washing machine from the smell

Education on various elements washing machine lead to a deterioration in the performance of all equipment and the accumulation of dirt, due to which an unpleasant odor and mold appears. Therefore, this situation should also be urgently corrected.

Complete breakdown

Cleaning the washing machine from dirt and odors can be carried out using copper sulfate. This technique has been used for a very long time as the best medicine for mold. It is produced in the form of a powder, which should be diluted in an amount of 30 grams per 1 liter of water.

Then you manually process the elements inside, not forgetting about the protective equipment for your hands, and leave it to ventilate for a day. After 24 hours, you fall asleep in the machine with any detergent and send it to work at 60 or 90 degrees. Then, once again skip the empty equipment in the “no laundry” mode, but without adding anything.

Cleaning closed areas under seals

Another option is to use baking soda. Which you dilute in the ratio of half a glass of water and soda, and process the insides of the technique.

Note! During processing, it is necessary not to miss any elements, including gum, seals and other parts.

Do not forget to run it on the rinse mode after cleaning your equipment to completely eliminate all residues of the product.

How to clean the filter and drum in a washing machine

We looked at how to clean washing machines with citric acid and other options. Such methods covered all the elements, however, there are details that require special attention - these are the tank itself and the drain filter.

Drain filter

First, let's take a look at how to clean the drum of a washing machine from dirt. If there is no function to clear this element, then you can use the following tips:

Pour 100 ml of bleach into the drum itself and turn it on in the no-thing mode with a temperature of 60 degrees.
Pour 2 packets of citric acid directly into the drum and set the highest temperature setting. Moreover, it is then necessary to use the rinsing mode for complete rinsing.

Advice! Leave the door open after each use of the appliance so that there is no excess moisture inside.

To clean the drain filter, it must be unscrewed. This element is located at the bottom of the washer under the cover. The part itself looks like a cork with an additional thread or spiral. Unscrew the filter and drain off the remaining water.

Then, manually clean out all the debris. And do not be surprised to find the most unexpected things inside, for example, little things or bones from women's bras. After this procedure, screw the filter back on tightly.

We continue to use clean technique

To make it clearer for you, we suggest watching a video on cleaning this element.

Video: how to clean the filter of a washing machine

Few recommendations

If you want your washing machine to serve you as long as possible, then take care of it. To do this, you should clean it from scale and fungi in time. Use a variety of tools at hand for cleaning, such as citric acid or soda. Remember to remove and clean the drain filter.

Now the machine is working

If you use vinegar, you should rinse the washer several times to completely remove any residues. And during manual cleaning, you should carefully process the places under the rubber band and seals.Use citric acid less than once a year. If the washing machine has already broken down, it is better to call the wizard to diagnose the breakdown.

RATE THIS ARTICLE