How to choose a heat pump for home heating: prices, types, installation basics
Extraction of heat from soil and water sources is not such a novelty. The Western world has long used geothermal energy to heat homes. This topic is becoming more and more relevant as prices for public utilities rise. A heat pump for home heating makes it possible to warm up the batteries in an environmentally friendly, safe and free way.
The heat pump heats the house with natural heat
The content of the article [Hide]
Heat pump for home heating: principle of operation, advantages and disadvantages
An example of a device like a heat pump is in every home - this is a refrigerator. It generates not only cold, but also heat - this is noticeable by the temperature of the rear wall of the unit. A similar principle is laid down in a heat pump - it collects thermal energy from water, earth and air.
Principle of operation and device
Heating system components
The system of the device is as follows:
Heat pump heating system
Heating systems based on heat pump installations have three components:
Pros and cons of the device
First, about the positive aspects of such heating:
The heat pump does not require any special maintenance or consumables
Reversibility principle in heat pump operation
This system also has its drawbacks, which cannot be ignored:
The device takes heat from the soil, lowering its temperature, this can adversely affect the root system of trees and shrubs
Which pump to choose
Installations differ in the source of thermal energy and the method of its transmission. There are five main types:
Site survey
Before installing the heating system, it is important to investigate the features of the site. This research will help determine which thermal energy source is the best option. The easiest way is if there is a reservoir next to the house. This fact will free you from the need to carry out earthworks. Another practical solution is to use an area where the wind is constantly blowing. If there is neither one nor the other, you will have to stop at earthworks.
Comparison of the efficiency of different heating systems
The heating system can have two installation options:
Ground-water pump and installation options
Geothermal probes are usually installed in a small area that does not allow a large pipeline to be laid. To install this system, drilling equipment will be required, since the depth of the wells must be at least one hundred meters, and the diameter must be twenty centimeters. Probes are lowered into such wells. The number of wells affects the performance of the heating system.
If the site is large enough, drilling can be dispensed with and a horizontal system can be installed. For this purpose, the coil is buried at a depth of one and a half meters. This version of the system is considered to be the most stable and reliable.
Water-to-water pump: easy installation
A water-to-water heat pump for home heating is suitable for areas with reservoirs. For the pipeline, you can use conventional polyethylene pipes... The assembled collector is moved to the pond and there is lowered to the bottom.This is one of the cheapest installation options that you can do yourself.
Installing a coil on a pond
Air-to-air heat pump: installation price
In an area where winds are constantly present, a system that uses air thermal energy is suitable. Installation in this case also does not require special costs, you can do it yourself. You just need to install the pump no further than twenty meters from the house in the most ventilated place.
The principle of operation of the air-air unit
Heat pump for home heating: prices and manufacturers
Heat pump units on the Russian market are represented by products of the following companies: Vaillant (Germany), Nibe (Sweden), Danfoss (Denmark), Mitsubishi Electric (Japan), Mammoth (USA), Viessmann (Germany). Russian manufacturers SunDue and Henk are not inferior to them in quality.
The Nibe unit will easily fit into the interior of the house
To heat a house with an area of one hundred square meters, a ten-kilowatt installation is required.
Table 1. Average cost of different types of pumps with a capacity of 10 kilowatts
| Picture | Pump type | Equipment cost, rub | Installation work cost, rub |
|---|---|---|---|
 | Ground-water Imported manufacturers | From 500,000 | From 80,000 |
| Ground-water domestic producers | From 360,000 | From 70,000 | |
 | Air to water Imported manufacturers | From 270,000 | From 50,000 |
| Air to water Domestic manufacturers | From 210,000 | From 40,000 | |
 | Water-water imported manufacturers | From 230,000 | From 50,000 |
| Domestic water-water producers | From 220,000 | From 40,000 |
The turnkey price of a heat pump is on average about 300 - 350 thousand rubles. The most budgetary option is considered to be the air-water system, since it does not require expensive earthworks.
Self-assembly
Considering the prices of heat pumps for home heating, this type of heating system cannot be called the cheapest. You can reduce costs by installing the pump yourself, but remember that improper installation is fraught with loss of device efficiency.
What you will have to face during self-installation:
The heating system with a heat pump unit includes a whole complex of units
Does it make sense to risk self-installation when purchasing such expensive equipment?
Thus, if a decision is made to buy a heat pump for heating a house, the price of professional installation should be included in the estimate.
From operating experience
Outcome
A heat pump is a rather expensive device that will pay off in at least five to seven years. But if you take into account the durability of the system, about half a century, then this is a profitable acquisition.such a device will allow you to heat the house even in the absence of gas and electricity networks. This heating system is fireproof and efficient, works in automatic mode and does not require special maintenance. But in order to achieve such results, you need to entrust the installation of equipment to professionals.
Video: do it yourself heat pump from an air conditioner
Loading... 
