Soft roof: types and prices, photos of the best options and installation methods

Modern soft roofing materials are based on the use of traditional roofing material. The soft roof is environmentally friendly and natural, the types and prices of which are presented in a large assortment. Such coatings are lightweight, easy to process and bright presentable. Soft types of roof have a common feature: they only attach to a solid base. Often such a coating does not require additional moisture protection. Soft roofing is stronger and more durable than ordinary roofing felt.

Soft roofing options are aesthetically pleasing

Soft roof: types and prices of bituminous coating

Bitumen shingles are similar to conventional shingles, although they have a flat surface.

Different types of shingles will be a wonderful decoration for any building

The flexible coating is successfully used on round, complex and combined types of roofs. Modern varieties of bitumen-based material are resistant to mechanical stress, as well as to temperature shocks.

Despite the elastic texture, such coatings are distinguished by excellent qualities of reliability and strength.

The composition of the materials contains rubber modifiers, which allow you to add bending strength, as well as resistance to negative temperatures. For extra durability of the coating, there is a fiberglass reinforcing layer in its composition. Stone dressing in the form of basalt chips is used as a protective layer.

On top of any soft material, a special powder is used, which helps to increase the service life of this coating

Features of choosing a soft roof TechnoNICOL: types and prices

Soft roofs have different types and prices. It is worth highlighting coarse-grained, fine-grained, surfaces, as well as multilayer, single-layer or with a metal coating.

TechnoNICOL material is popular due to its special characteristics, strength and affordable price

The composition of the TechnoNICOL material contains fiberglass, which makes the coating resistant to deformation, tensile strength, and also incombustibility. Also, the material is lightweight, which will make repairs less laborious, as well as waste-free.

Bottom layer characteristics

The lower part of the soft tile has special properties, the types and prices may vary. This part has adhesive characteristics, so it is protected from above with a special film. The material sticks together when bituminous substances are combined. The faster the process will occur if the coating is preheated.

On the diagram you can see where the bottom layer is located and what the rest of the layers consist of.

Properties of individual types of coatings

Long and reliable operation will be ensured by a soft roof, the types and prices of which can be found in a large assortment on the Internet. Soft materials, subject to the laying technology, can turn into a stable and unbreakable structure.

Shingles are suitable for the most intricate curves of the roof surface

You can determine the quality of the product by the top layer of the crumb. If it is spilled evenly and adhered firmly, then the coating is of good quality. Also, the plates must be elastic and have a uniform layer thickness.

Soft tiles: types and prices

The cost of a soft coating depends on the quality of the material and the specific manufacturer. The table shows the soft roll roofing of different manufacturers, its types and prices.

Soft roofing TechnoNICOL, the types and prices of which are very diverse, is presented in a wide range on the Russian market. Premium material costs from 100 rubles per square meter. Economy coverage can be purchased for 50 rubles. Moreover, the cost of installation work varies from 150 to 350 rubles per square meter.

The products of each manufacturer have both positive aspects and certain disadvantages.

Tips: how to check the material for quality

Low-quality products can be identified by their strong rigidity. When installing it, you need to ensure good ventilation between the logs or plates. This will protect the material from decay. Ventilation is an additional layer of thermal insulation.

Advantages of a soft roof

The flexible material has the following advantages:

Installation of a soft roof structure is simple

Cons of material

Flexible coating has certain disadvantages:

The nuances of flexible roofing

When deciding how to lay soft tiles, you should know that this material has excellent tenacity. It can be mounted at a 90 degree angle.This material can be used for complex roofs. They can be laid on curved bases with a high precision of joining.

Installation of soft surfaces requires accuracy and correct calculations

How is the installation done?

Laying soft tiles differs in simplicity. As a base for this material is used plywood sheet with resistance to moisture, OSB canvas or trim plates are mounted to the support elements. In this case, the seams of the lower casing should have gaps of at least 2 mm.

For laying the roofing, the installation of the lathing is required

Roof ventilation is an important point. Which contains the following elements:

The roofing plates are laid after the installation of the ventilation elements

Arrangement of a soft coating involves laying a cushioning layer. It is mounted on the end parts of the roof, valleys and elements on the cornice from top to bottom. For high-quality tightness of the overlap area, coat with bituminous mastic. Metal strips are used to protect the edges of the battens.

Additional parts are used when installing the roof structure

When installing this option, a special film is removed from the bottom surface. The eaves cover is laid at a distance of several centimeters along its overhang. Installation of the main part of the roof covering is carried out from the middle of the overhang to the end parts. Under normal conditions, the plates are fastened with nails. If the flooring is very curved, then at least five nails should be used.

Installation of the roof is carried out using mastic

The initial row is made so that the placement of its edges should be at a distance of no more than a centimeter from the edging of the tiles. The joints of the canvases are masked with special elements. Along the edge, this coating is cut off and glued to a width of at least 10 cm.

Joints to different elements of the roof are processed with insulating materials

Before installation work, experts recommend marking the roof surfaces with horizontal lines. This will allow the material to be laid in a straight line.

Installation of such a roof in some cases requires special insurance.

To make roof tiles for the ridge, you need to divide the eaves sheet into three parts along the perforation lines. Place the material on the ridge in a parallel direction. Each part is secured with nails. An overlap with a tile sheet is laid on the fasteners.

The place for the skate is additionally processed

In some cases, euroruberoid is used instead of bituminous tiles. It can be mounted on a flat roof. The base for this material must be well cleaned of dirt and dust.

Covering the roof with euroruberoid is much easier than with a simple roofing material

At exit points chimney additional insulation must be carried out using rubber seals.

Chimney exit points require additional processing

Roof coverings differ in various designs

The use of soft shingles allows for a durable and beautiful roof structure.

Video: types and characteristics of a soft roof

RATE THIS ARTICLE

Loading...

 

See also:

How to choose the right ondulin: price per sheet, dimensions and nuances of installation Dimensions of sheet metal for the roof: price, features of choice and installation work Roofing materials for the roof: types and prices of various types, scope, overview of manufacturers Soffits for roofing: installation technology Flexible shingles: DIY installation with step by step photos Installation of metal tiles: step-by-step instructions with useful recommendations