Epoxy grout for tiles: pros and cons of use, instructions for use

When performing finishing work, it sometimes becomes necessary that the material used has not only decorative properties, but can also perform a protective function, while maintaining its physical properties for a long time. It is to such materials that epoxy grout for tiles belongs, its properties and scope, as well as the composition and advantages of use - this is the topic of this article for the readers of the online magazine homemaster.techinfus.com/en/.

Correctly selected material is the key to the successful operation of the tile for many years

Scope of application

This type of grout is used when performing finishing work both indoors and outdoors, due to the physical properties of such compounds. Resistance to water and chemically active substances significantly expands the scope of use of grouts based on epoxy resins.

This material is used for:

The use of epoxy compounds when finishing the pool bowl will secure its use in various life situations

Composition and main characteristics

Epoxy grout is a two-component material consisting of epoxy resin and a catalyst, usually made from organic matter. The catalyst is a hardener by the type of action on the epoxy resin. In addition, to give the finished composition an attractive appearance, secondary fillers are added to it: dyes, glitters, mother-of-pearl and even gold-containing dust.

The main characteristics of this material are:

A variety of secondary fillers allows you to create a composition of an individual color required for the design of the space

Pros and cons of using

Epoxy-based grout, as, indeed, all building materials, has its inherent advantages, which can be formulated as follows:

Pleasant appearance is the same advantage of this material as its strength and durability.

The disadvantages include:

Working with special tools and personal protective equipment will prevent negative effects on the worker's skin

Features of epoxy grout for tiles "Litokol" and "Ceresit"

In the group of grouts used for finishing works made on the basis of epoxy resins, the most popular brands among professionals and ordinary users are "Litokol" and "Ceresit".

Epoxy grout "Litokol"    

The company "Litokol" (Italy) produces several types of epoxy grout:

Brand "Litokol", available in various packaging, which is very convenient when using

Ceresit epoxy grout   

The company "Ceresit" (Russia-Germany) produces a wide range of building materials: from tile cladding and waterproofing to plaster and finishing mixtures.

Epoxy grout "Ceresit CE 79 UltraPox"

In the category of epoxy-based tile grout, there is a brand Ceresit CE 79 UltraPox... This water-resistant two-component mixture is resistant to chemical attack, abrasion and can be used for exterior as well as interior work. Grout color is gray.

Comparison of the properties of cement and epoxy grout

Grades of grout made on a cement and epoxy base have their own advantages and disadvantages due to their physical properties, which determine the possibility of using one or another type of this finishing material. Cement-based formulations are available in two versions: dry or ready-made. To use dry brands, you must mix them with water or latex, and ready-made ones can be used immediately after opening the container in which they are sold.

Works using epoxy compounds are carried out using a rubber spatula

This species has the ability to long-term storage, especially for dry formulations. In addition, their advantages are considered to be ease of use and high quality of the result obtained. The disadvantages of cement-based brands include: destruction under the influence of external mechanical influences, the ability to transmit moisture and pollution.

Epoxy based grouts do not have the above disadvantages, however, they are difficult to use and are subject to rapid hardening after mixing the components of the mixture.

Key benefits yesof a different type of material, in comparison with cement-containing ones: the possibility of using in aggressive environments, resistance to moisture penetration and long service life.

Before starting work on grouting tile joints, it is necessary to prepare a tool and personal protective equipment

Instructions for preparation and use

Working with epoxy grout is a rather complex process, which requires certain skills and care during its implementation. All work can be divided into several stages: preparatory, work execution and final.

Preparatory stage

At this stage, the material is purchased, the tools necessary for the work are prepared:

When preparing the composition, it is necessary to observe the proportions recommended by the manufacturer, as well as to use dyes compatible with the brand of the material used.

Execution of works

Initially, it is necessary to mix the existing components of the material used - epoxy resin and hardener. Before that, you should select the color of the grout, if this was not done at the stage of its purchase (brands "Litochrome Starlike" or "Starlike Defender"), for which a dye is selected, its amount is determined. The amount of dye must be determined empirically by mixing a small volume of the composition. In addition, if necessary, to give plasticity to the prepared material, you can add a plasticizer corresponding to the brand of grout. When the issues are resolved with all the components, you can start preparing the mixture.

When mixing, the finished composition must be strictly homogeneous, otherwise the quality of the work performed will be low

This is done as follows:

Illustration	Description of work
	Place the epoxy in the prepared container.
	We add dyes, a plasticizer and, if necessary, quartz sand, after which we add a hardener.
	Using a mixer installed in an electric drill, mix until a homogeneous mass is obtained.

An expert's point of view

Dmitry Holodok

Technical Director of the repair and construction company "ILASSTROY"

“The amount of the mixture to be prepared should be such that it would be possible to work it out before it hardens. In quantitative terms, this is 200-300 g, which a trained specialist will consume within one hour.

Forming and grouting with a sponge

Once the grout has been prepared, you can start filling the joints. These works are performed in the following sequence:

Illustration	Description of work
	Using a spatula, we place the grout in the tile joint, the filling is done in small "portions".
	With the help of a trowel, the composition is compacted in the inner space of the tile joint.
	Using a sponge dipped in water, we carry out the finishing grout.

The remaining parts of the finished mixture are removed after they have dried on the second day of work.

The final stage

The next day, after the main stage of the work has been completed, you need to perform a number of more operations:

Illustration	Description of work
	We remove the epoxy coating from the tile surface, for which we use a special mixture designed for these purposes - "Litonet", we do everything exactly according to the instructions.
	Remove excess elements and particles of the mixture with a sponge.

After complete drying, the surface is checked again for the presence of epoxy deposits and residues of the composition, if any, the work is repeated.

In large retail chains you can always find the necessary building material

At what price and where can you buy epoxy grout for tiles - an overview of current offers

The price of epoxy grout for tiles in different trade organizations may differ, which is due to the sales volumes of similar companies, the level of specialization, as well as the presence of dealer contracts with manufacturers. The following table shows the cost per grades of epoxy grout used when laying tiles and other finishing materials, as of the beginning of the second quarter of 2018, when sold through large retail chains of building materials.

Brand (Weight - 5 kg)	Average cost (as of April 2018), rubles
	www.m-ceramics.ru	www.stroimag.com	www.stroysmart.pro
Starlike C.350 Crystal	3700	3400	-
Starlike Defender	5305	-	-
"Litochrome Starlike"	5750	5400	-
"Epoxystuk X90"	3900	3500	-
Ceresit CE 79 UltraPox	-	-	4100

The luminescent properties of epoxy grout create individuality and uniqueness of the room in which the decoration is made using them

Consumer feedback on epoxy grout for tiles

On the Internet, you can find reviews of experienced users about almost everything that is produced and sold on our planet, and, of course, you can find there the opinions of consumers who have already used epoxy grout when installing tiles and other finishing materials, here are some of them.

Video: how to work with epoxy grout. Workshop on grouting tiles!

RATE THIS ARTICLE

Loading...

 

See also:

How to fix PVC panels to the wall and ceiling: installation features How to calculate the area of ​​a room: professional advice and basic rules The most popular choice and its nuances: Ceresit tile grout 3D panels for walls in the interior: original and embossed design Why do you need tile grout Elite attic: is it possible to translate the classic loft style into an ordinary apartment?